Sell 【Better Life】Garden DIY Pavement Mold Walk Concrete Mould Molds Floor Road Stepping Driveway Mold best price

Hello! Welcome to Easy Affordable! Quality first, service first is our tenet. If you have any questions, please feel free to contact us. The goods in this shop are abundant, pay attention to this shop, and the baby will ship first! We are local businessmen in the Philippines. Our delivery speed is the fastest in the Philippines. Delivery takes about 1-3 days in Manila and 3-6 days in other areas. Please rest assured to order, thank you! Type: Paving Mould Color: Black Material: Plastic Quantity: 1 pc Size: S1【35*35cm/ 13.36*13.36”】 S2【30*30cm/ 11.81*11.81”】 Net weight: S1 【450g】 S2 【220g】 Packages: 1* Paving Mould Features: Professional strong plastic,you can use it minimum 1600 times,guaranteed by manufacturer. 🎇1. Very practical garden tools - Concrete garden molds will help you decorate your backyard landscape. 🎇2. Use heavy-duty plastic molds to turn some pre-mixed concrete into concrete garden stepping stones for easy access to the garden. 🎇3. By using garden stepping stones as your path, the beauty and health of your plants. 🎇4. Spray the cleaning mold with a garden hose for reuse. 🎇5. Once the first garden stepping stone is watered, the garden stone mold can be used again. 🎇6. Ideal for creating sidewalks, sidewalks, trails, terraces, picnic areas and other outdoor finishes. 🎇7. Enjoy DIY's personal philosophy with stone molds and create beautiful paths in your garden right away. 🎇8. DIY plastic molding paving mold is a personalized brick mold, the effect of laying is like a stone. 🎇9. Make the path more exotic and create a style that belongs to your own garden path. Widely use This reusable plastic mold for creating patterned walks, path, for patio, yard, garden, lawn etc. How to use: 🎁Step 1: Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel. 🎁Step 2: Fill the paver mold, plow the concrete with a shovel and make sure to fill each area. 🎁Step 3: Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles. 🎁Step 4: Smooth the concrete according to the contour of the mold and wipe off the excess. 🎁Step 5: Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly. 🎁Step 6: After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle.