Sell Audio-Technica AT2020 Cardioid Condenser Microphone ( Black ) best price

The AT2020 Cardioid Condenser Microphone from Audio-Technica is designed for vocal and general instrument capturing in project and professional studio environments. The capsule features a low-mass, side-address diaphragm with a cardioid polar pattern for rejecting ambiance and noise at the off-axis sections of the microphone capsule. A linear frequency response of 20 Hz to 20 kHz enables the flexibility to accurately reproduce signals from a wide variety of sources. High SPL handling and wide dynamic range allow the AT2020 to capture loud signals with minimal noise and distortion. The microphone includes a pivoting, threaded stand mount for accurate positioning. Features Suitable for project/home-studio applications High SPL handling and wide dynamic range provide maximum versatility Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone Specs Microphone Form Factor: Stand/Boom Mount Sound Field: Mono Capsule: Condenser Polar Pattern: Cardioid Orientation: Side Address Circuitry: Solid-State Pad: None High-Pass Filter: None Tone Adjustment: None Indicators: None On-Board Controls: None Frequency Range: 20 Hz to 20 kHz Maximum SPL: 144 dB SPL Impedance: 100 Ohms Sensitivity: 14.1 mV/Pa Dynamic Range: 124 dB Signal-to-Noise Ratio: 74 dB Equivalent Noise Level: 20 dB THD: 1% Output Connectors (Analog): 1 x XLR 3-Pin Male (on Mic) Operating Voltage: 48 V (Phantom Power) Operating Current Consumption: 2.0 mA Mounting: 5/8"-27 Female, Mic Clip (with Included Hardware); 3/8"-16 Female (via Integrated Hardware) Dimensions: ø: 2.05 x L: 6.38" / ø: 52 x L: 162 mm Weight: 12.17 oz / 345 g Package Weight: 28 oz/ 794 g Box Dimensions (LxWxH): 9.75 x 9.6 x 2.9" Box Content Audio-Technica AT2020 Cardioid Condenser Microphone Stand Mount for 5/8"-27 Threaded Stands 5/8"-27 to 3/8"-16 Threaded Adapter Protective Pouch