Sell AN-08A Motorcycle TPMS Motorbike Tire Pressure Monitoring System Tyre Temperature Alarm System with best price

✈️ Ready Stock overseas! You can place your order directly and we will ship to Shopee warehouse either today or tomorrow. The order status will change to shipping only after Shopee scan your parcel in 1-3 days. ❤️ Follow us for more happening deals! ❤️Thank you for your good rating if you enjoy shopping with Car Accessories! Description: This TPMS is designed to provide you with more protection when riding. It will warn the tire condition in advance. After installing TPMS, this system can monitor the tire pressure and temperature in real-time. If any abnormal tire pressure and temperature are detected, the system will send a warning sound and a bright flashing icon to inform you in real-time. Real-time reminders and problem-solving can prevent traffic accidents and ensure the safety of riders and passengers. Feature: 1.With a QC 3.0 fast-charging USB output, it can charge mobile phones, tablets, and power banks. 2.Support battery voltage detection and display, and low-voltage alarm function. Specification 1.Model Tire pressure setting range: 0.1~6.0Bar Temperature setting range: 60℃~100℃ Working temperature: -20℃~+80℃ Storage temperature: -30℃~+85℃ Power voltage: DC 12V Output voltage: DC 12V, 9V, 5V Frequency: 433.92MHz±20.00MHz 2.Receiver Working temperature --20℃~80℃ Storage temperature: -30℃~85℃ Power-on voltage: DC 5V Frequency: 433.92MHz±20.00MHz 3.Sensor Working temperature: -20℃~80℃ Storage temperature: -30℃~85℃ Pressure range: 0~6.6Bar Pressure accuracy: +/-0.1Bar Temperature accuracy: +/-3℃ Transmitting power: Frequency: 433.92MHz±20.00MHz 4.Bracket install 1. Unscrew the 2 screws, put on the motorcycle/electric bike/bicycle and tighten; 2. Place the mounting head of the bracket toward the position you need, and confirm that the bracket is firm; 3. Install the tire pressure receiver on the bracket, tighten it and then lock it; use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately 5.Power install 1. When installing, the power cord needs to be connected behind the ignition switch, and the power can be automatically cut off after shutting down. The red connects to the 12V positive pole and the black connects to the ground. 2. Install the fixed bracket on the handlebar and lock it tightly. Install the host on the bracket and adjust the angle and lock it. 3. Install the sensor when the host is turned on. First, install the tamper ring into the valve nozzle, then install the sensor on the valve according to the position and tighten it, then screw the tamper ring back and tighten it. If you find that there is no corresponding position on the host If the pressure is displayed, reinstall the sensor at the corresponding position.✈️ Ready Stock overseas! You can place your order directly, and we will ship to Shopee warehouse either today or tomorrow. The order status will change to shipping only after Shopee scan your parcel in 1-3 days. ❤️ Follow us for more happening deals