Sell ✵AIYIMA D05 5.0 Bluetooth Sound Amplifier 120W×2 HIFI 2.1 Channel Digital Power Amplifiers Subwoofer best price
0
ratings
₱15,139
22% OFF
₱11,808 - ₱13,617
Ships from | Caloocan City, Metro Manila |
---|---|
Variation | Amp With EU Plug Only Amplifier Amp With US Plug |
Size | CN Russian Federation |
Product Description
Parameters:
Product model: Aiyima--D05
Color: Black
Chips set: CM6642, TAS5508, TAS5352A, QCC3008, CS8422, WM8782
Working Voltage: DC 24-36V, can't over 36V ( package includes 32V 5A power adapter)
Input sensitivity: 0.775V
Frequency response: 20Hz-20kHz (±1dB)
SNR(Singal noise rate): ≥105dB
Distortion: 0.001%
Bluetooth Version: 5.0 (QCC3008)
Bluetooth support: ACC.SBC.aptX.aptX LL
Speaker match resistance: 4-8Ohm
Amplifier max output power: 120W+120W, load 4Ohm speaker
PC-USB Support max sample rate: PCM 192kHz/24Bit
Coaxial Support max sample rate: PCM 192kHz/24Bit
Optical Support max sample rate: 192kHz/24Bit
PC-USB support system: XP, W7, W10, mac, Linux, mobile phone OTG
Audio input: Bluetooth, PC-USB, Optical, Coaxial, RCA
Audio output: Banana Jack, Golden subwoofer output (connect with active subwoofer speaker)
Product size: 183*128.5*37mm
Package weight: 1.5kg.
Operation Steps:
1. Connect speakers to SPK OUT interface
2. Connect the sound source to the sound
source input interface
3. Connect power supply (power supply
should not exceed
4. Press machine ON/OFF or remote control
to start the machine
5. Press the machine input channel
selection key or the remote control to
select the input channel
6. When using bluetooth input, the input
channel needs to be set to BT
Instructions for PC-USB operation:
1. Connect the PC-USB interface of the rear
surface of the machine with factory
provided USB cable (USB can support hot
plug)
2. Press the input signal selection switch to
select USB input.
3. The following photo shows the icon with
horn symbol in the lower right corner of
PC
4. Click right button to pop up the dialog
window and click
5. Select the playback device recognized by
PC in the pop-up dialog window (USB of
this machine is automatic identification,
no manual installation and drive).
6. Click to confirm the identified digital
output.
Common Questions:
Q: Why can't I find Bluetooth?
A: The input channel must be switched to BT to search for a connection to bluetooth
Q: Why music is stutter when using bluetoth?
A: The effective transmission distance of bluetooth is 10M without blocking. If it exceeds 10M or there is obstruction, the transmission distance of bluetooth will be affected
Q: Will my speakers burn out if I have a speaker below 100W?
A: No, the maximum output of the amplifier is 120W, which means the sound is set to the maximum. If the speaker is low in power, just turn the sound down
Q: Why does the speaker have so loud current noise?
A: If you are not using the power supply not from factory originally, please replace the power supply before testing.Many power sources in the market have high interference factor which will cause high current sound。
Q: Why do I plug in the input line and not connect to the sound source, the sound box will have a big buzz?
A: When the signal line without shielding is not load, there will be interference signal into