Sell 433Mhz autogate Clone Remote Control Copy Controller 315MHZ/330MHZ Wireless Transmitter Switch 4 Button Garage door key 【Including battery】 best price

【Including battery】！ Test chip: for 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC908 series, 527 (all manufacturers), 1527 ( All manufacturers), 2240 (all manufacturers HCS101/HCS200/HCS201/HCS300/HCS301 (partial code), 5026, 5326, 5326-3, 5326-4, 7, PT2240, HT12E, HT640, PLC168, SMC series 9XX, PT2292, 12L-4SC, HT6026, UM3750AM part of the one-chip computer, etc. Parameter: Working voltage: DC12V Working current: 10mA 12V Transmission frequency: 330/ 315/433MHZ Transmission distance: 120-150M (empty ground, receiving device sensitivity is negative 100dbm) Encoder type: fixed code. learning code. partial rolling code Function: Copy remote control / test remote control / copy remote control Size: 6.7*1.7*1.7 (cm) Features: The remote control is widely used, mainly for remote control electric retractable doors, elevators, remote control gate brakes, remote control shutter doors, garage doors, sliding doors, remote control LED lights, remote fireworks igniters, remote control passenger doors, burglar alarms, electric door alarms, motorcycle burglar alarm, etc One-to-one key copy, each key password is saved separately, and can be used repeatedly for one million times. Strong privacy, especially suitable for copying your own remote control at home. Instructions: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand can not let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicats that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code. 2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control. #auto #gate #autogate #remote #remotecontrol #DIP #dialcode #5326 #330Mhz #433Mhz#SMC5326#8DIP#12V