Sell 4 Port USB 2.0 KVM Switcher VGA Manual Switch KVM Switch BOX XPcL best price

Product Specifications 4 computers use a four-in and one-out switch to play on one monitor: 1. 4 USB cables and 4 VGA cables are required, 2. Use one of the double parallel wires to connect to the VGA port of computer 1. (The USB port of the dual parallel cable is connected to the USB jack of the chassis), and the other end of the dual parallel cable is connected to the PC1 port of the switcher. (The square port of the double parallel cable is connected to the USB1 port of the switch). The other three double parallel lines are respectively connected to the VGA ports of computer 2, computer 3, and computer 4 and the PC2, PC3, PC4, and ports of the switch. 3. Connect a VGA cable to the VGA port of the monitor, and connect the other end to the VGA port on the side of the switch. 4. Connect the mouse and keyboard to the USB port on the side of the switch. (The 3 USB ports reserved for the switcher can connect to the mouse and keyboard) 5. Connect the power supply and turn on the device. Use the switch button on the switcher to switch between two computers on one monitor. Super key information: After the line connection is completed, please start a host first and wait for the computer to start up and enter the desktop, then turn on the second host and enter the desktop, followed by the third and fourth. Avoid USB interface conflicts. Product Features: The KVM 4-port switch is a manual KVM switch with a USB interface, which can manually control 4 hosts through the keyboard/mouse/display, and will not appear after the traditional manual switch is switched, the computer crashes, the display is black, and the keyboard and mouse are not easy to use And other bad issues. Note: The resolution of some integrated graphics cards can only be up to 1600x900, and independent graphics cards can be up to 1920x1440