Sell 10 Ports 2+8 PoE Switch Injector 52V Network switch Ethernet with 10/100Mbps Ports Suitable for IP best price

10 Ports 2+8 PoE Switch Injector 52V Network switch Ethernet with 10/100Mbps Ports Suitable for IP camera/Wireless AP/CCTV camer1.Ten 10/100Mbps Power Over Ethernet Port2.1-10 Port: 10/100M auto sensing RJ45 port3.Max. 30W for each PSE/PoE Port (Port 1~8)4.Switch Mode:    a.Mode 1(Standard): Port 1~10: 10/100M auto-sensing @ 100 meters    b.Mode 2(Extend): Port 1~8: 10M @ 250 meters; Port 9~10: 100M @ 100 meters    c.Mode 3(VLAN): Port 1~8: 100M @ 100 meters; Port 9~10: 100M @ 100 meters; Ports5.  1 to 8 will be isolated from each other, but will still be able to communicate with uplink port 9 and 10.6.  Auto-detect full/half-duplex, MDI/MDI-X7.  IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex8.  Store and forward9. Fanless design10. Rugged metal enclosureIndustry Standards IEEE 802.3af/at, IEEE 802.3, IEEE 802.3u, IEEE 802.3xPerformance Bandwidth 1.6GBuffer Size 1MMAC Size 1KFlow Control Full duplex flow controlSwitching Architecture Store-and-ForwardConnector(s) Connector Type(s) 10 x 10/100M RJ45 PortsPort 1~8: IEEE 802.3AF/AT PoE portSoftware OS Compatibility OS Independent; No additional driver or software requiredIndicators LED Indicators1 – Power (Green)1 – Extend (Green)1 – VLAN (Green)8 – PoE Status (Blue)10 – Link/Activity (Green)Power Source DC Adapter IncludedEnvironmental Humidity 20~80% RHOperating Temperature 5°C to 50°C (41°F to 122°F)Storage Temperature -25°C to 70°C (-13°F to 158°F)Note:1.Please allow 1-3mm differs due to manual measurement.2.Please noted this is standard 15V6A power supply,if you do not want this power adater seperate,pls contact with me. #Port #Switch #Network #Switcher #Ethernet #Camera #Camera