Sell 1.2W DC solar fountain pump rockery garden pool solar fountain best price

Product introduction: This solar brushless water pump adopts high-sensitivity and low-power Hall elements, coupled with high-efficiency and intelligent electronic circuit drive, and adopts the volute design in fluid mechanics for the impeller cavity to reduce the resistance of water flow, so that the overall performance is better than that of the traditional structure. The efficiency of the solar water pump is increased by 20%. It also solves the shortcomings of the current brushless solar pumps that are difficult to start, low in efficiency, and poor in stability. The water pump can be connected to various nozzles of different shapes to spray different water types. Solar panel specifications: Rated voltage: 7V Rated power: 1.2W Material: polysilicon, PET laminated Pump specifications: Working voltage: DC 7V Working current: 150MA Maximum lift: 100CM Maximum flow: 180L/H Pump life:> 20000 hours Pump noise: <45DB Package dimensions: Inner box size: 120*120mm weight: 260g Product performance: Water spray height: 30--60cm, the height of the water spray will be different if different nozzles are connected. When the solar panel receives sufficient sunlight, the water pump will start within 3 seconds. Instructions: 1) Assemble the product according to the schematic diagram. 2) Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally. 3) When the water pump is just put into the water, there is air in it, which may affect the spray effect. It is recommended to wait for the water pump to spray normally before connecting the spray head. Precautions: 1 This product is a solar direct-drive water pump without an external battery. The height of the water spray depends entirely on the strength of the sun. When the sun is weak, the pump will not work continuously, but will automatically start repeatedly until the sun reaches a certain intensity. The pump resumes continuous operation. When using, please place the product in unobstructed sunlight. Shading will affect the normal operation of the pump. If you need to store electricity or store electricity with LED lights, please choose other models of our company. 2 The pump must be completely immersed in the water, and it cannot be dehydrated for a long time. When the water pump is just immersed in the water, because there is air in the water pump, it is recommended to wait for the water pump to spray normally before inserting the nozzle. 3 Please keep the water source clean and clean the pump regularly to prevent foreign matter from being sucked in by the pump and causing the pump to fail to work normally.